Herunterladen Inhalt Inhalt Diese Seite drucken

Warning; Error - Otto Bock C1000 DS Gebrauchsanweisung

Elektrorollstuhl
Vorschau ausblenden Andere Handbücher für C1000 DS:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Malfunctions / troubleshooting
INFORMATION
Should you encounter problems while troubleshooting or if
you do not manage to completely eliminate a problem by
following the measures described here, please contact
your specialist dealer.
Malfunctions are indicated on the control panel LCD moni-
tor. Table 10 describes the individual error codes with the
corresponding problem sources as well as the possible
causes and resolutions.
If malfunctions cannot be fully corrected using the proce-
dures described here, an authorized dealer has the ability to
read the exact error code with a handheld programming
device and to carry out a targeted system analysis.
All problems that have ever occurred are saved in a list and
can be retrieved, e.g. in case of a general overhaul of the
power wheelchair. The saved data can be used to deter-
mine future service and maintenance intervals, for example.
212
Ottobock
|
8.1

Warning

A warning indicates a status or malfunction of one or several
components of the power wheelchair. The function of compo-
nents that have no errors is not restricted. For example, if the
connection between the controller and seat motor malfunc-
tions, this error will only be indicated if the user attempts to
activate the motor. However, the driving function is still avail-
able.
8.2

Error

CAUTION
Risk of injury if the power wheelchair stops abruptly. In
the event of communication problems in the bus system of
the control unit, the system triggers an emergency stop to
prevent any uncontrolled functions. Depending on the
source of the malfunction, it is possible to drive the wheel-
chair out of a danger zone such as road traffic after switch-
ing the control unit on again.
If the driving function is still not available after switching
the control unit on again, the brake must be deactivated
(see Section 6.5) to switch over to pushing mode. After the
power wheelchair has triggered an emergency stop, con-
tact a specialist dealer as soon as possible!
C1000 DS

Quicklinks ausblenden:

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis