Adjusting The Lower Leg Length; Adjusting The Angle Of The Elevating Footrest; Adjusting The Height Of The Armrest For Desk Side Panel - Otto Bock Motus Bedienungsanleitung

6.7 Adjusting the Lower Leg Length (Fig. 42/43)
By loosening the set screw, the footplate can be adapted to your lower leg length and to the
thickness of your seat cushion (standard footrest = fig. 42; elevating footrest = fig. 43).
Make sure when adjusting the footrest height, that the footrest bar is slid into the swivel segment
at least 40 mm. A marking on the footrest bar indicates how far the bar should be slid in.
After having made adjustments, retighten the set screw to a torque of 6 Nm.
INfORMATION
6.8 Adjusting the Angle of the Elevating Footrest (Fig. 44)
To adjust the footrest angle, turn the release lever (fig. 44, see arrow) up to the stop. While prop-
ping up the footrest bar, set the desired angle. Then carefully let the release lever turn back. At
the next free position, the footrest will snap into place.
6.9 Adjusting the Height of the Armrest for Desk Side Panel (Fig. 45)
The armrest can be adjusted in height by bringing it into various positions without use of any
tools. For this purpose, pull the button in the round opening in the side panel upward (fig. 45,
see arrow) and shift the armrest into the desired position. The armrest automatically locks in
place after releasing the button.
42
44
43
45
57