Side Panel With Arm Rest; Figure 10 Loosening The Thumb Screw For Removal Of The Side Panel With Arm Rest - Otto Bock C1000 DS Gebrauchsanweisung

Operation

6.1.3 Side panel with arm rest

INFORMATION
For additional information on side panels with lighting: See
„Lighting" section.
Removing the side panel with arm rest
1. Loosen the thumb screw at the lower end of the side
panel holder.
2. Pull the side panel with arm rest up and out.
3. After remounting the side panel, do not forget to firmly
retighten the thumb screw.
If the control panel is attached to the arm rest, it must be
removed before taking out the side panel (Section 6.1.4).
160 Ottobock
|
Figure 10 Loosening the thumb screw for removal of the side panel
with arm rest
C1000 DS