Otto Bock C1000 DS Gebrauchsanweisung Seite 173

the joystick ahead or back. The electric motor moves the
respective function as long as the joystick is deflected and
stops at the end positions.
Electric back angle adjustment: When the joystick is de-
flected ahead or back, the back rest moves ahead or back
accordingly. The electric motor moves the back rest as long
as the joystick is deflected and stops at the end positions.
Electric seat tilt: Deflecting the joystick to the rear will elec-
trically tilt the seat to the rear. Deflecting the joystick to the
front tilts the seat ahead until it is level (factory setting, may
be adapted by the specialist dealer).
Electric seat height adjustment: Deflecting the joystick
ahead or back raises or lowers the electric lift seat. As
soon as the electric seat height adjustment fixture leaves
the lowest position, the speed is reduced (creep speed)
because the power wheelchair is less tip-resistant. On the
control panel, this is indicated by the snail symbol on the
LCD monitor (see Figure 20).
Coupled seat adjustment: Deflecting the joystick ahead or
back moves the back rest and seat forward and down or
back and up simultaneously.
Electric footrests: Deflecting the joystick ahead or back
raises or lowers the electric footrests.
C1000 DS
Pressing the "M" button (approximately 2 seconds) switches
back to driving mode.
Display symbol(s)
Operation
Information
Electric back angle
adjustment
Electric seat tilt
Electric seat height
adjustment
Coupled electric seat adjust-
ment (back rest and seat tilt)
Electric footrests, coupled
Electric footrest, left
Electric footrest, right
Ottobock
|
173