Figure 43 Push Button Module - Otto Bock C1000 DS Gebrauchsanweisung

The symbols used on the push button module correspond to
the symbols used on the LCD monitor (see 7.3.3 "Separate
LCD Monitor with Infrared).
Push button functions
The "M" button (= mode, Figure 43, item 2) is used to
advance the individual functions (1-2-3-4-5-1-2-...).
The blue LED (Figure 43, item 3) indicates the selected
function.
The selected function is executed with the arrow keys (Fig-
ure 43, item 4) (function up / down).
INFORMATION
The function of the arrow keys can be adapted according
to the wishes of the user (up arrow = function up or func-
tion down – depending on programming). Programming
may only be completed by instructed specialist staff.
Three freely positionable Piko buttons may also be connect-
ed to the push button module as accessories (Figure 43,
item 5). They assume the function of the mode and up /
down arrow keys (Figure 43, items 2/4). Symbols on the
back of the push button module indicate the corresponding
function.
C1000 DS
Figure 43 Push button module
1 Available electric functions
2 "Function selection" mode button
3 "Selected function" LED indicator
4 Up / Down arrow keys (see information box)
5 Stereo plug for the connection of Piko buttons
Accessories
1
2
3
4
5
Ottobock 203
|