Electric Back Angle Adjustment; Figure 34 Electric Seat Tilt - Otto Bock C1000 DS Gebrauchsanweisung

INFORMATION
Please also observe the safety instructions in the section
„Electric Seat Functions" > „Safety Instructions for Use".
The power wheelchair can be equipped with an electric seat
tilt function. The electric seat tilt function allows the seat to
be tilted, for example to relieve pressure.
The electric seat tilt feature is available in the following ver-
sions:
„ Electric seat tilt up to 30°
„ Electric seat tilt up to 45°
For more information on the specific equipment of this power
wheelchair, contact the qualified personnel.
The seat can be tilted back continuously to the angle speci-
fied above.
It is controlled by the joystick in "additional function" mode
or by the push button module. The power wheelchair has an
integrated feature that shifts the centre of gravity and serves
to improve stability against tipping.
C1000 DS
Figure 34 Electric seat tilt

7.1.4 Electric Back Angle Adjustment

WARNING
Risk of falling due to incorrect use of back angle ad-
justment
„ Drive in street traffic only with a vertical backrest.
„ When driving with the back angle adjustment acti-
vated, fasten the belts (lap belt, four-point belt) and do
not lean out beyond the seat surface with the seat
raised.
Accessories
Ottobock 193
|