1
Figure 2
Anti-tipper
1
Anti-tipper front, both sides
4.2
Settings
WARNING
Risk of accidents and injury due to incorrect settings. All
subsequent adaptation or adjustment work may only be
carried out by authorised specialist dealers.
C1000 DS
The following tools are required to adapt the wheelchair to
the needs of the user and / or to complete the maintenance
tasks:
Allen wrenches, sizes 3 to 6
Ring or open-end wrenches, sizes 8, 10,13
Ratchet and socket, size 17
Torque wrench
Phillips screwdriver
Screwdriver for pan head screws
Tyre repair accessories
4.3
Initial operation
WARNING
Risk of suffocation. Packaging materials must be kept out
of reach of children.
All components must be checked for completeness and
functionality prior to initial operation. Before the power
wheelchair can be switched on, the fuse must be inserted
into the fuse holder to the left rear of the battery case (see
Figure 3).
Delivery and preparation for use
Ottobock
|
151