Otto Bock C1000 DS Gebrauchsanweisung Seite 198

Accessories
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 5 „Attendant control activated" display
Battery LED (item 2)
The battery LED lights up when the unit is on. Colour and
flash codes provide information on the current battery
charge level:
LED
Green is lit
Orange is lit
Red is lit
Red is flashing
Green is flashing
198 Ottobock
|
Information
Attendant control activated
Status
Battery charge level > 70 %
Battery charge level
30 % - 70 %
Battery charge level <30 %
Battery deep discharge -
charge immediately
Battery over-voltage (e.g.
after driving downhill) -
Continue driving slowly
LED
Red/Orange/Green flash-
ing alternately
Tab. 6 Display of battery charge level
Mode button (item 3)
Switch between speed level 1 and 2 by pressing the button
briefly.
Push and hold the button (at least 2 seconds) to switch the
control unit to the electric seat functions.
Mode LED (item 4)
The Mode LED indicates the speed level status and system
faults using 3 colour LEDs and various flash codes:
LED
Green is lit
Orange is lit
Red – flashing
1x/2x/3x/4x/5x
Off
Tab. 7 Display of the speed levels / system faults
Status
Charging process / drive
away lock
Status
Speed level 1
Speed level 2
Fault (see chapter 8.2.2)
LED display switched to
seat functions
C1000 DS