Fig. 9 Loosening The Quick Clamp; Fig. 10 Securing The Battery Packs - Otto Bock A200 Gebrauchsanweisung

Transportation and Storage
9. Fold the seat bottom onto the frame: To do so you must
loosen the two quick clamps on the front seat brackets.
You can now fold down the seat surface by slight lifting
the seat brackets and simultaneously pushing them
backwards (Fig. 9).
To reduce the space needed, the battery packs can be re-
placed into the drive unit sustainer. Take care that the red
arrows on the battery packs point in driving direction. To
prevent the battery packs from falling out of the drive unit
sustainer, the locking lever must be relocated (Fig. 10).
Fig. 9 Loosening the quick clamp
96 Ottobock
|
Fig. 10 Securing the battery packs
The control panel can either be laid onto the battery packs
or put into the holder provided for this purpose. Make sure
that the control panel remains switched off and that no
cables are pinched.
The power wheelchair is now disassembled (Fig. 11) and
can be packed into a car.
NOTICE
Risk of damage as a result of not engaging the locks
sufficiently. Sufficiently secure the disassembled power
wheelchair components against slipping during transport.
A200