Figure 21 Information Window With Drive-Away Lock - Otto Bock C1000 DS Gebrauchsanweisung

Figure 21 Information window with drive-away lock
Deactivation via control panel
1. Press the On/Off button to turn on the control unit.
2. Move the joystick to the front end position until you hear
a beep.
3. Move the joystick to the rear end position until you hear
a beep.
4. Release the joystick.
5. Another beep confirms the successful deactivation of
the drive-away lock.
C1000 DS
6. The speed level and battery indicator appear on the
LCD monitor and the control unit is ready for driving.
Now the drive-away lock is deactivated and the wheelchair
can be driven.
INFORMATION
If the joystick is not moved correctly, the drive-away lock
remains activated. In order to deactivate the drive-away
lock, the control unit must be switched off. The power
wheelchair can be switched on again and the drive-away
lock can be deactivated.
Deactivation via separate LCD monitor
An information window is shown on the LCD monitor after
the power wheelchair is switched on. The deactivation proc-
ess is the same as described under "Deactivation via con-
trol panel".
Operation
Ottobock 175
|