Malfunctions / Troubleshooting - Otto Bock C1000 DS Gebrauchsanweisung

Arm rest accessories: Special adapter for the arm rests
in our wheelchair accessories catalogue
Joystick accessories: Fork for tetraplegics, STICK S80,
soft ball, golf ball and flexible control stick shaft
Protective bow for control panel: Metal bow to protect
the control panel against impacts
Crutch holder
Folding rear view mirror
Tray
INFORMATION
These and other optional add-on components are included on
the order form and in the wheelchair accessories catalogue.
C1000 DS
8

Malfunctions / troubleshooting

CAUTION
Risk of accidents and injury due to uncontrolled move-
ments of the power wheelchair. Uncontrolled movements
can occur during the operation of the power wheelchair as
a result of malfunctions. In this case, please contact your
authorised dealer immediately.
INFORMATION
During the use of the power wheelchair, electrical dis-
charges may occur which are caused by factors such as
friction (high voltage with low current; discharge via the
user). However, these do not represent a health hazard.
This reduction in comfort – under consideration of the
environmental conditions the user is exposed to – can be
eliminated by custom fabrication measures (installing a
mechanical discharge contact / ground strap to the
wheelchair frame).
Electrostatic discharge may also occur if the power wheel-
chair is equipped with puncture-proof tyres. Retrofitting the
wheelchair with pneumatic tyres can correct this problem.
Malfunctions / troubleshooting
Ottobock 211
|