Changing The Battery Installation Position; Figure 29 Battery Stop; Figure 30 Release Bolt Engaged - Otto Bock C1000 DS Gebrauchsanweisung

Figure 29 Battery stop
1 Stop, rear position
INFORMATION
When installing the track, ensure the release bolt engages
correctly. It has to lock into the corresponding recess on
the drive unit sustainer.
C1000 DS
1
Figure 30 Release bolt engaged

6.6.5 Changing the battery installation position

WARNING
Risk of tipping due to changes in the centre of gravity.
Changing the battery position also changes the centre of
gravity of the power wheelchair. There is a risk that the
steering casters may loose ground contact and the front
anti-tipper may engage.
Test the effects of the centre of gravity shift on the behav-
iour of the power wheelchair with the support of an attend-
ant.
Operation
Ottobock 187
|