Operation
4.
Unscrew the caps (see Figure 26) of the individual
chambers with a large screwdriver. You will be able to
see the battery fluid level on the acid level markings.
5.
If the fluid is below this marking, top up with distilled
water.
6.
Close the battery case.
7.
Close the battery drawer.
Maintenance-free lead gel batteries can be used as an al-
ternative.
Figure 24
Opening the battery drawer
Page 134
Downloaded from
www.Manualslib.com
manuals search engine
Figure 25
Snap buckle on the support strap
Figure 26
Batteries
02/2009
B600