Armrest; Control Panel; Removing The Control Panel - Otto Bock skippi Bedienungsanleitung

9.3 Armrest

The armrests can be removed by loosening the thumb
screws at the lower end of the armrests and lifting the
armrests upwards (Fig. 17). The height of the armrest can
be changed by loosening the screw at the upper end of the
armrest holder (Fig. 18).
Ensure the screw is firmly retightened after making any
adjustments. Both armrests can be removed, however,
only the side without the control panel can be removed
directly. Before removing the armrest on the side with
control panel, the control panel must be removed.

9.4 Control Panel

9.4.1 Removing the Control Panel

The control panel is held in place by a simple spring
sheet metal and can be removed by pulling it to the front
(Fig. 19).
Fig. 17
Fig. 19
Fig. 18
69