Figure 27
Unlocking the battery drawer and removing the track
5. Use a ring or open-end wrench size 11 to disconnect
all cables from the batteries.
6. Remove the batteries by the handles.
C1000 DS
Figure 28
Removing the batteries by the handles
7. Put the new batteries in place. Ensure that the batteries
are up against the stop.
8. Use a ring or open-end wrench size 11 to connect all
cables to the batteries. Observe correct polarity (black
cable = connection to negative pole, red cable = con-
nection to the positive pole).
9. Reinstall the track. Ensure that there is no play be-
tween the batteries and track when installing the track.
Operation
Ottobock
175
|