Otto Bock C1000 DS Gebrauchsanweisung Seite 199

Display of the selected electric seat function (item 5)
The electric seat functions are accessed by pressing and
holding the „M" button (approx. 2 seconds).
The currently selected seat function is indicated on the con-
trol panel display (see chapter 6.3.7) and by the following
LEDs on the attendant control:
LED indicator
Tab. 8 Display of electric seat functions
C1000 DS
Information
Electric back angle adjust-
ment
Electric seat tilt
Electric seat height adjust-
ment
Coupled electric seat
adjustment (backrest and
seat tilt)
Moving the joystick right switches between the different seat
functions. The selected function can be extended or retract-
ed by moving the joystick forward or backward (also see
chapter 6.3.7).
The corresponding LED flashes if an error occurs. See
chapter 8.2.2 for the meaning of the fault notifications.
Joystick (item 6)
The joystick is used for driving. The further it is moved away
from the centre position, the faster the power wheelchair will
drive in this direction.
If the seat functions are accessed with the Mode button,
then the joystick is used to select and activate the seat func-
tions (see item 5 and chapter 6.3.7).
Accessories
Ottobock 199
|