Side Stand - MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch

A
B
A
C
D
E
F
G
H
I
B
L
M
N
O
P
8
C
4

SIDE STAND

Stand removal:
• Place the motorbike on the center stand or, in case it
is not fitted, on a firm mount;
• Remove the protection "A" (Stone) or the installed left-
hand section frame cover, if any;
• Remove the side stand sensor support plate with the
assembled sensor;
• Release the 2 springs "B";
• Unscrew the other screws "C" and remove the side
stand with the support.
Reassembly:
• After checking that the stand is not deformed and that
the springs are not yielded (if so, replace the
necessary parts), carry out the removal procedures
in reverse order.
Ø3
Ø15
C
The spring must stretch for
2
7 m/m under a 10 Kg. load.
Die Feder muss sich bei
einer Belastung von 10 2
um 7 mm verlängern
Onder een gewicht van 10 2
moet de veer m/m 7 uitrekken
HASSIS
kg
kg,