MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch Seite 402

A
B
C
D
I
E
F
G
H
I
L
M
P
N
O
P
12
I
H
L
O
M
N
N
• Remove the external clutch body "G" from its seat on
the cover, remove the thrust bearing "H", the internal
body "I" and the clutch control rod "L".
Removal of the internal clutch body "M"
• On the clutch side, unscrew the internal body lock ring
nut "N" by means of the proper tool "O" code 30912810
and the gib head wrench code 14912603 after
straightening out the ring nut retainer safety washer
rib "P", then remove the "M" body.
Removal of the gearbox cover "R"
G
• Unscrew the 11 screws "Q" and remove the cover "R".
N.B. When unscrewing the screw "S", pay
attention to the position of the breather pipes
support, which shall be reassembled in the same
place.
• Remove the gear selector cover "U" provided with "V"
spring.
M
Q
R
S
T
G
EARBOX