Tank "5 - MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch

A
B
C
D
E
D
F
G
H
I
E
L
F
M
N
O
P
6
3
A
B
Disassembly:
• Remove the front seat as described in section E
chapter 4;
• Unscrew and remove the fastening screw "A";
• Remove the washer "B";
• Detach in the front:
• Remove the tube from the pressure adjuster "D";
• On the LH side detach:
• The connection for the fuel level sensor "E" and the
connection for the fuel solenoid valve "F";
• Loosen the clamp "G" and remove the tube from the
fuel solenoid valve "F";
• Lift the front of the fuel tank and remove the breather
pipe "I";
• Lift the rear part of the tank and remove it by sliding it
backwards.
Reassembly:
To reassemble, first connect the breather pipe "I" and the
pressure adjuster, then place the front end of the tank in
G
the chassis and fix it with the proper screw in the rear
side; reconnect all wirings and piping previously
disassembled; reassemble the seat.
I

TANK "5"

WARNING
The fuel contained in the tank is highly
inflammable.
Flames, cigarettes and other objects emitting
heat, if present during tank removal procedures
or in places where fuel is stored, are a great risk
for the operator.
Always work in well ventilated places.
F
UEL SYSTEM