MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch Seite 199

A
B
C
D
E
F
G
H
I
L
M
N
O
P
58
G
D
B C
E F
• Remove the stanchion "D" from the wheel-holder leg
together with the seal ring "E", the cap "F", the upper
H
bushing "G" on the leg and the lower bushing "H" on
the stanchion.
N.B. While removing stanchion "D" from the
wheel-holder leg, the parts "E", "F" and "G" may
remain inside the leg. If so, they shall be removed
afterwards, paying attention not to damage the
leg edge and the upper bushing "G" seat on the
leg.
• Check all the parts removed from inside the leg, in
particular the seal ring "E" and the dust scraper "B",
since they provide the sealing. If they are damaged,
replace them.
• Check bushing "H" on the stanchion; if damaged or
worn, remove and replace it.
H
W
HEEL PARTS