MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch Seite 498

A
B
C
D
E
F
G
H
I
L
M
N
O
P
44
A
A
C
ONTROLS
RH
SIDE
Removal:
• Remove the accelerator control as described in
chapter 4 section G;
• Remove the saddle as described in chapter 4 section
E;
• Remove the tank as illustrated in chapter 3 sect. I;
• Detach the RH control cable from the main connector
"A";
• Remove the cable from the chassis by cutting all the
clamps fastening it;
Refitting:
Follow the removal procedure in reverse order and fasten
the cable onto the chassis using new clamps.
LH
SIDE
Removal:
• Remove the saddle as described in chapter 4 section
E;
• Remove the tank as illustrated in chapter 3 sect. I;
• Disconnect the LH control cable from the main
connector "A"
• Release the cable from any eventual clamps;
Refitting:
Follow the removal procedure in reverse order.
E
LECTRICAL
S
YSTEM