A
B
C
D
E
F
G
H
I
L
M
N
C
O
P
40
Cover assembly on the gearbox housing
N.B. While reassembling the cover complete with
range selector, make sure that the gearbox
control splined drum is in neutral. If not so, the
retaining keys of the range selector would
interfere with the drum crown instead of settle
freely in the control notches indicated by the
arrows.
•
Place the gasket "A" on the housing.
•
Temporarily secure the cover with four screws.
•
Insert the transmission shaft "B" on the cover by
screwing it carefully.
•
Insert the o-ring seal "C" on the secondary shaft, the
shim washer "D", the crown of the speed drive fitment
and the crown retaining ball on the secondary shaft.
A
•
Temporarily screw the nut on the secondary shaft.
•
Assemble the operating tool code 14928700 on the
range selector shaft.
B
D
G
EARBOX