MOTO GUZZI CALIFORNIA JACKAL Werkstatt-Handbuch Seite 325

A
1
B
C
D
E
F
G
H
3
I
L
M
N
O
P
10
O
IL SUMP
The oil sump is positioned under the engine and is
fastened onto it by means of 18 screws.
To remove the oil sump:
• Position a suitable pan under the sump for collecting
the used oil;
• Drain all the oil as described in paragraph "Engine oil
replacement", chapter 2 section D;
• Unscrew the 18 screws "A" fastening the oil sump to
the engine crankcase;
• Remove the oil sump "1";
Between the oil sump and the crankcase, there is a gasket
A
which must always be replaced after disassembly.
O
IL MESH FILTER
This is fastened inside the oil sump; for its maintenance,
see paragraph "washing the oil mesh filter" in chapter 2
section D.
O
IL CARTRIDGE FILTER
2
This is fastened inside the oil sump; for its maintenance,
see paragraph "replacing the oil cartridge filter" in chapter
2 section D;
"1"
"2"
"3"
E
NGINE