Fig. 23: "E/A Ibs Opc With Optical Fiber" I/O Module: Setting Of Transmission Power And The Baud Rate - Bosch Rexroth PSI 6 Serie Betriebsanleitung

304 / 460 Bosch Rexroth AG
Information on this product
Setting of baud rate and transmission power
Front side

Fig. 23: "E/A IBS OPC with optical fiber" I/O module: Setting of transmission power and the baud rate.

" The transmission power must not be changed without consulting
with us.
I/O module
The power of the transmission diodes is calibrated ex factory.
The manual markings show the factory settings of the transmission
power switches.
Thus the factory setting can be restored any time.
8 7 1
off
on
Transmission power
Baud rate:
on:
off:
Manual markings with the factory settings for trans­
mission power.
PSI 6xxx | 1070080028 / 08
500 kB
2 MB