Installation And Assembly - Bosch Rexroth PSI 6 Serie Betriebsanleitung

244 / 460 Bosch Rexroth AG
Safety instructions
2.6.3

Installation and assembly

Dangerous electrical voltage
Possibility of cardiac arrhythmia, burns, shock!
" Please ensure that all plant sections worked on in the course of
the assembly have been safely isolated from supply and suffi­
ciently protected against accidental/unintended reclosing!
Insufficient degree of protection
Reduction of personal/plant safety!
The degree of protection of the product described corresponds to
"
IP 20. Always install it in a switch cabinet satisfying at least degree
of protection IP 54.
Inappropriate performance of installation or assembly works
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" Make sure that installation and assembly are performed by quali­
fied personnel who also has expert knowledge in the field of elec­
tromagnetic compatibility.
" Please note the information provided in the technical data (e. g.
the environmental conditions).
" Please note the valid safety and accident prevention regulations.
" Do not ever deactivate any safety-relevant equipment.
Insufficient ergonomics
Possibility of reduction of personal/plant safety, negative effects
on health and/or concentration, function disturbances/restrictions,
operating errors!
Make sure that the devices and especially the operating elements
"
are installed to ensure optimum ergonomics. Operating elements
must be easy to reach at all times, and displays must be easy to
read!
" Make sure that the devices and the operating elements are suffi­
ciently protected against inadvertent operation or contact.
PSI 6xxx |
WARNING
CAUTION
1070080028 / 08