Description Of Performance - Bosch Rexroth PSI 6 Serie Betriebsanleitung

1070080028 / 08 | PSI 6xxx
5.1

Description of performance

• User interface for operation, programming and diagnosis:
- complete graphical user interface BOS,
- system requirements:
executable on PCs with operating systems
Windows 7 with Service Pack 1 (32 Bit, 64 Bit)
Windows 8 or 8.1
Windows 10
- Dotnet framework 4.x
- Microsoft Internet Explore 5.0 (or higher)
- with limited functional scope using the small operator terminal
VCP05.2 (link via RS232 or Ethernet).
• optional access protection for operation/programming
- by registration with own user name and own password
• Programming link to PC (BOS).
- for one individual timer via V24/RS232
(e.g. for local programming)
- simultaneous connection of several timers via field bus interface
(e.g. Ethernet).
• Type-dependent I/O connections
(communication with, e.g., robot/PLC):
- parallel (discrete I/O wiring)
- serial (via bus system):
• Number of programs:
- 256 (more programs are also possible, depending on the type)
- symbolic spot addressing is possible.
• Programming of times in millisecond intervals
• Universal adaptability of the welding schedule
- 3 programmable weld times (PreWLD: pre-heating time, Main­
WLD: welding current time, PstWLD post-heating time).
The weld times can be jointly operated in a single control mode
(standard mode) and in different control modes (mixed mode).
- PreWLD and PstWLD can be deactivated
- programmable pulse operation for MainWLD
- programmable slope (current upslope/downslope time) for Main­
WLD
• Welding modes:
- spot welding (e.g. for applications with a robot)
- repeat welding (e.g. in applications with manual guns)
- Roll seam
• Closed-loop control modes:
- PHA (phase angle)
- KSR (CCR - Constant-current regulation)
Bosch Rexroth AG
Information on this product
Profibus DP
Interbus S
DeviceNet
Ethernet-IP
ProfiNet
267 / 460