Fig. 22: Front Panel View: "E/A Ibs Opc With Optical Fiber" I/O Module - Bosch Rexroth PSI 6 Serie Betriebsanleitung

1070080028 / 08 | PSI 6xxx
Diagnosis messages of the module:
- TR: Transmit/Receive; no meaning in this case.
- CC: Cable check; bus connection (coming from the previous IB‐S
node) exists. Is switched off in the case of reset at the master.
- UL: Unit Supply; illuminated: supply voltage is present (X10).
- BA: Bus Active; illuminated: data transfer takes place.
- RD: Remote Disable; illuminated: indicates that the bus connec­
tion (to the next IB‐S node) is switched off.
- FO1: Illuminated if incoming optical fiber disturbed.
- FO2: Illuminated if outgoing optical fiber disturbed
INTERBUS-S connection IN for optical fiber connection
(coming from the previous IB‐S node)
INTERBUS‐S connection OUT for optical fiber connection
(going to the next IB‐S node)
- Signal inputs I0 to I7 (24 V
- Signal outputs O0 to O7 (24 V
- Power supply to the I/O module (24 V
Terminals 1 and 3 linked internally
Terminals 2 and 4 linked internally

Fig. 22: Front panel view: "E/A IBS OPC with optical fiber" I/O module

), with control LED
DC
), with control LED
DC
)
DC
Bosch Rexroth AG
Information on this product
X15
X14
X13
X12
X11
X11
X10
303 / 460