R911330645 | PSI 6xCx.751
If "UI memory" deleted is present, it can only be reset when an XQR parameter
has been written again.
A KSR current monitoring continues to be active in case of UI monitoring
without UI regulation.
7.1.4
Special features of the Fault Reset function
If the stop circuit is open, for example with opening of safety doors,
the input signals "Fault reset with reweld" and "Fault reset with WC"
and the commands "Fault reset with reweld" and "Fault reset with WC"
will be ignored from the user interface, that means the control remain in error
state.
Only after the stop circuit is closed again, then the fault with reweld can be
acknowledged.
Bosch Rexroth AG
45/52
Features