Bosch Rexroth PSI 6 Serie Betriebsanleitung Seite 417

1070080028 / 08 | PSI 6xxx
Removal
9
8
Turn in the two screws (11) to fix the module in place (max. 0.25 Nm).
5.
Use the "AnyBus IPconfig" software for the Ethernet configuration of
the AnyBus module (installation file is included in the BOS software
package, refer to BOS data medium: directory path "Tools/Any­
Bus").
For removal, proceed as follows:
Make sure that the 24V logic supply of the timer has been switched
1.
off!
Loosen the two screws (11).
2.
Grab the two screws and pull the module out of the slot.
3.
Use a blanking plate (1) to cover the slot.
4.
Bosch Rexroth AG
Extension and conversion
11 8
9
11
10 2
417 / 460