Operation; Fig. 88: Display During Normal Operation If No Error Is Present - Bosch Rexroth PSI 6 Serie Betriebsanleitung

1070080028 / 08 | PSI 6xxx
9

Operation

Please note the instructions on operation of the product from page
"
248 and from page 260.
PSI 6x00

Fig. 88: Display during normal operation if no error is present

• WELD TIME LED; yellow.
Is lit while the power unit is activated
(= weld time is executed).
For PSI 6x00:
• READY LED.
Is illuminated in green if no error is present in the timer. The unit is
ready for welding.
For PSI 6xCx:
• The diagnosis module displays "RUN" if no error is present in the
timer. The unit is ready for welding.
For information on programming and handling, please refer to the
online help of BOS 6000.
The operating procedures that are possible and how they are ac­
tivated is dependent on the respective application.
Bosch Rexroth AG
READY LED
WELD TIME LED
Diagnosis module
393 / 460
Operation
PSI 6xC0