Fig. 18: Diagnosis Module: Ethernet Menu - Bosch Rexroth PSI 6 Serie Betriebsanleitung

290 / 460 Bosch Rexroth AG
Information on this product
to / from
main menu
Esc Enter
Enter
ETHERN.1
Esc
Y B
Structure
ETHERN.2
same as
ETHERN.1
Enter
3
ExAA:<1>
Esc

Fig. 18: Diagnosis module: ETHERNET menu

Reset warnings
ETHERNET main menu item:
Display showing the Ethernet configuration of the AnyBus module
(ETHERN.1) or - if inserted - of the "CC Ethernet 100 Mbit" module
(ETHERN.2).
The following diagram provides an overview of the structure:
1 2
Y B
IP addr. <n>
Y B
Subnet <n>
Y
B
Gateway <n>
Y B
MAC addr. <n>
B
Y
1 2
Enter
ExBB:<2> ExCC:<3>
Esc
DISPLAY main menu item:
Display test
The test always starts by driving all pixels. Afterwards, all available
characters can be scrolled through using the Y and B keys.
"ESC" leads back to the main menu.
TIME main menu item:
Display shows the timer's date and time.
"ESC" leads back to the main menu.
The timer's time and date are automatically synchronized with the
PC clock if BOS is active. Manual settings are not necessary.
Press the "Enter" key several times until the display shows "Quit".
1.
Press
2.
the "ESC" key to cancel acknowledgement, or
the "Enter" key to acknowledge the warning.
Enter
n =
3
n =
Esc
Enter
3
Esc
Enter
3
Esc
Enter Enter
<x>: MAC address part 1
<y>
<x>
<x>: MAC address part 2
Esc Esc
<1>: 1st number block of the address
Enter
<2>: 2nd number block of the address
ExDD:<4>
<3>: 3rd number block of the address
Esc
<4>: 4th number block of the address
PSI 6xxx | 1070080028 / 08
1: ETHERN.1
2: ETHERN.2
Example:
MAC address = 00-e0-98-82-c9-79
x = 00-e0-98, y = 82-c9-79
Example:
IP address = 192.168.0.1
<1> = 192, <2> = 168,
<3> = 000, <4> = 001