Fig. 17: Diagnosis Module: Main Menu - Bosch Rexroth PSI 6 Serie Betriebsanleitung

1070080028 / 08 | PSI 6xxx
Displaying more information
Hardware faults cannot be reset.
Self-acknowledging faults are automatically reset by the system
when the cause of the fault is no longer present (e.g. line voltage off/
on).
The display can also show more information concerning any faults
present (refer to section "Displaying more information" starting on
page 289). After approx. 3 min without pressing a key, the display
returns to the fault display.
For code numbers with explanations and possible remedies, refer to
the BOS Online Help function, Section „Messages".
When the timer has booted (INIT is displayed), it is in "Ready" state
(RUN is displayed) or in a fault state (display of fault number and
additional code).
In both cases, you can access more information that can be selected via
the "main menu".
Main menu
TYPE
Y
ETHERNET
Y
DISPLAY
Y
TIME
Fig. 17: Diagnosis module:
TYPE main menu item
Ticker showing the timer type, drawing number and version.
Possible keys at this level:
• "ESC":
Return to the main menu.
• "Enter":
The ticker will stop. The information can now be retrieved in static
blocks of 8 characters, each, using the "Enter" and "ESC" keys.
Bosch Rexroth AG
Information on this product
Enter
Display
Esc
B
Enter
Display
Esc
B
Enter
Display
Esc
B
Enter
Display
Esc
Main menu
289 / 460