E/A Ibs X_Fern_8Ea" (Interbus-S) I/O Module; Table 14: Technical Data: "E/A Ibs X_Fern_8Ea" I/O Module - Bosch Rexroth PSI 6 Serie Betriebsanleitung

1070080028 / 08 | PSI 6xxx
5.2.4.14

"E/A IBS X_FERN_8EA" (INTERBUS-S) I/O module

Voltage supply
Discrete signal outputs and inputs
INTERBUS-S connection
Features:
• 8 discrete inputs (24 V
• 8 discrete outputs (24 V
• INTERBUS-S via copper cable
Function:
• Linking the timer I/O to the higher-level PLC or the robot
• via INTERBUS-S with copper cable at X12 and X13 (serial I/Os)
and
• via discrete 24 V signals at X14 and X15 (parallel I/Os).
Table 14: Technical data: "E/A IBS X_FERN_8EA" I/O module
Operating voltage
Power input
Power loss
Signal inputs
Signal outputs
Connection: X14...X15 (via terminals 24V and 0V): 10-pole;
STKK, grid 3.5 mm, max. 1.5 mm
Mating connector is comprised in the delivery.
Cable length: (from power source to consumer)
max. 10 m at 0.75 mm
max. 75 m at 1.5 mm
Cable type: unshielded, VDE 0281, 0812 (e.g.: Ölflex)
Connection: X14...X15: 10-pole;
STKK, grid 3.5 mm, max. 1.5 mm
Mating connector is comprised in the delivery.
Cable length: max. 100 m at 0.5 mm
Cable type: unshielded, VDE 0281, 0812 (e.g.: Ölflex)
IBS-IN connection: X13 (coming from the previous node)
sub D, 9-pole, using female connector on cable
side
IBS-OUT connection: X12 (going to the next node)
sub D, 9-pole, using male connector on cable
side
Cable length: according to INTERBUS-S specification
Bosch Rexroth AG
Information on this product
)
DC
)
DC
+24 V= ; +20 %, -15 %
with max. +/-5 % ripple
subject to circuitry connected to the signal inputs/
outputs
0.5 VA per active input
2.4 VA per active output
logic 1: +16 V ... +30 V, 20 mA
logic 0: -1 V ... +4 V
+24 V, max. 0.1 A, short-circuit-proof
2
2
2
309 / 460
2
.
2
.