Operating The Product - Bosch Rexroth PSI 6 Serie Betriebsanleitung

248 / 460 Bosch Rexroth AG
Safety instructions
2.6.5

Operating the product

Defective connection of cables
Possibility of reduction of safety of persons/systems, function
disturbances/restrictions!
" All conductor cross-sections should be rated in accordance with
the installed load.
" Make sure that the connecting cables cannot become detached
inadvertently.
Please note the maximum tightening torque for screws and termi­
"
nals specified in the technical data.
Please ensure that the contact areas are bare, i. e. free from
"
paint, plastic coats or dirt/oxidation.
Please ensure that the insulation of connecting cables is not
"
damaged.
Strong electromagnetic fields during the welding sequence
Possibility of function disturbances of cardiac pacemakers, other
implants or also hearing aids!
Make sure that persons dependent on or using devices of this kind
"
generally avoid resistance welding equipment.
" Make sure that corresponding warning signs are posted at a
proper distance from resistance welding equipment.
" Please observe
(2013/35/EU)". It defines the limit values for extremities which
may be exceeded especially in manual welding gun applications.
In cases of doubt, please measure the field strength and provide
additional measures to ensure health and safety at work.
Please note the Instructions DGUV 15, "Accident prevention re­
"
gulation relating to electromagnetic fields" issued by the Berufs­
genossenschaft (employers' third party liability insurance asso­
ciation).
PSI 6xxx |
WARNING
WARNING
EC directive „Electromagnetic
1070080028 / 08
fields