260 / 460
Bosch Rexroth AG
General information on damage to property and products
3.4
Operation
High-frequency interference
Possibility of interference with other devices in the environment!
Make sure that no other devices or their functioning can be affec
"
ted if the present product is operated.
The product is part of class A resistance welding equipment.
Class A resistance welding equipment is designed for industrial
networks (also refer to „intended use" page 239).
Use in the public low-voltage network which supplies e.g.
residential areas therefore requires special measures.
Plugging or unplugging modules or connectors/terminals into/from
live systems
Possibility of damage to the electrical equipment, unexpected
plant reactions!
"
Unless described otherwise, never unplug or plug any connec
tors/terminals on live systems.
"
Do not ever plug or unplug timer components/modules during
operation.
Overheating due to insufficient cooling
Possibility of temporary interruption of the welding process, a re
duced useful life of the product!
Make sure that air-cooled devices are only operated with func
"
tioning forced cooling. Cooling by means of convection is not suffi
cient!
"
Make sure that water-cooled devices are only operated with suffi
cient cooling water flow, matching supply temperature and suita
ble cooling fluid quality. For further information, please refer to
technical data.
Strong electromagnetic fields during the welding sequence
Possibility of damage to wrist watches/pocket watches, floppy
disks or even cards with magnetic strips (e. g. EC cards)!
"
Therefore, you should not carry any such items on you when wor
king in the direct vicinity of the welding equipment.
PSI 6xxx |
NOTICE
1070080028 / 08