Diagnosis- And Service System Dss-Asc - Bosch Servodyn-ASC Betriebshandbuch

4.5. Diagnosis- and Service System 4.5. Diagnosis- and Service System 4.5. Diagnosis- and Service System
4.5. Diagnosis- and Service System 4.5. Diagnosis- and Service System
1070066022 - 101
Diagnosis and Service System DSS- ASC Diagnosis and Service System DSS- ASC Diagnosis and Service System DSS- ASC
Diagnosis and Service System DSS- ASC Diagnosis and Service System DSS- ASC
With the Bosch diagnostic and service system DSS-ASC a user-
friendly PC operator interface with access to all parameters is
available to you.
The parameters are subdevided into functional classes and can be
changed, filed or printed out as chosen. Operating instructions, error
messages as well as detailed online help make the handling a lot
easier.
For the individual adaption of the operator interface the numbers can
be reduced to an easy to grasp extent.
The optional RS 232 / 485 interface in the interface operator OP
permits the parameterizing of inverters via PC and Bosch-DSS ASC,
which simplifies the handling even further.
With the oscilloscope function the operating performance of the drive
can be optimized and monitored. In maximal 4 parallel indicated
channels setpoint value, speed, current load and other signals can be
recorded, saved as curves and printed out.
As required the recording can be started and stopped manually. The
resolution adjusts automatically to the best value and can be changed
subsequently. In addition the zoom function allows the exact analysis of
the recorded curves.
With the connection of Bosch ASC to the diagnostic system DSS-
ASC the identification of the unit is done automatically.
The instruction manual is integrated on the disc.
Part no.: 1070918191 DSS-ASC, disc 3 1/2 "
1070918223 PC-cable/ ASC, length 5 m
Servodyn - ASC
GB - 49
GB