Control Panel Holders; Swing-Away Control Panel Holder; Height-Adjustable Control Panel Holder; Special Controls - Otto Bock C2000 Gebrauchsanweisung

Accessories
The enAble50 control offers the possibility to use numerous
additional electrical functions as well as specially adapted
input devices.
The complete range of options is listed on the order form
and in the wheelchair accessories catalogue.
7.1

Control Panel Holders

7.1.1 Swing-away Control Panel Holder

To allow the user to drive the C2000 power wheelchair
closer to an object or under the edge of a table, the control
panel can be swung to the side with a special control panel
holder (see Fig. 30).
1. Apply a little bit of pressure to press the control panel
holder to the side and release the pivot element.
2. Swing the control panel holder to the side.
3. When bringing the control panel holder back to its origi-
nal position, the pivot element automatically locks into
place.
168 Ottobock
|
Fig. 31 Control panel holder, swing-away

7.1.2 Height-Adjustable Control Panel Holder

A special control panel holder can be mounted optionally,
allowing the control panel to be moved downwards. To
make use of this option, loosen the attachment screw (see
Fig. 31) and move the control panel to the desired height.
7.2

Special Controls

Various special controls such as the sip and puff control,
chin control, mini joystick, etc. can be added to the C2000
power wheelchair.
C2000