Additional Electrical Functions - Otto Bock C2000 Gebrauchsanweisung

Display symbol(s)
Tab. 2 Battery indicator on the control panel

6.3.5 Additional Electrical Functions

INFORMATION
For more information on additional electrical functions,
please see Section 6.7.
The other electric additional functions, such as electric back
angle adjustment, seat tilt or footrests, are also activated by
pressing the button "M", which must be held down for ap-
proximately 2 seconds.
To change between the different functions, shortly press the
button "M" or move the joystick to the right. The function that
is currently selected is shown on the LCD display. The re-
spective function can be extended or retracted by moving
the joystick ahead or back. The electric motor moves the
C2000
Information
Creep speed
Attendant control
respective function as long as the joystick is deflected, and
stops at the end positions.
Electric back angle adjustment: When the joystick is de-
flected ahead or back, the backrest electrically moves
ahead or back accordingly. The electric motor moves the
backrest as long as the joystick is deflected, and stops at
the end positions.
Electric seat tilt: Deflecting the joystick to the rear will elec-
trically tilt the seat to the rear. Deflecting the joystick to the
front tilts the seat ahead until it is level (factory setting; can
be adapted by the specialist dealer).
Seat height adjustment device: Deflecting the joystick
ahead or back electrically raises or lowers the seat.
Electric footrests: Deflecting the joystick ahead or back
raises or lowers the electric footrests.
Coupled seat adjustment: Deflecting the joystick ahead or
back moves the backrest and seat forward and down or
back and up simultaneously.
You can switch back to driving mode by pressing the "M"
button.
Operation
Ottobock 147
|