Otto Bock C2000 Gebrauchsanweisung Seite 132

Transportation and Storage
movements of wheelchair components. To avoid injuries at
pinch and shear points, carry out such works with the sup-
port of another person. Make sure to always keep parts of
the body (e. g. hands or head) out of the danger zone.
CAUTION
Risk of injury due to insufficient restraints. Secure the
power wheelchair during transport in another vehicle suffi-
ciently with tensioning straps. Only attach the tensioning
straps to the corresponding eyebolts and given lashing
points.
CAUTION
Risk of pinching or crushing in the pivot range of the
footplate(s). Make sure your limbs are not in the danger
area when folding the footplate(s) up or down.
NOTICE
Risk of damage due to falling. The maximum net weight
of the C2000 power wheelchair is approx. 190 kg. Hoist-
ing devices and transportation vehicles used for transpor-
tation must have sufficient capacity.
132 Ottobock
|
The fixing eyebolts on the driving side of the C2000 power
wheelchair and the rims of the caster wheels serve as at-
tachment points for tensioning straps.
Fig. 5 Eyebolts on the driving side
Before transporting the power wheelchair, switch off the
control unit and engage the brake.
You can reduce the size of the power wheelchair for trans-
portation by folding the footplate(s) up, removing the side
panels and folding down the backrest.
C2000