Electric Seat Functions; Safety Instructions - Otto Bock C2000 Gebrauchsanweisung

Operation
6.7

Electric Seat Functions

The power wheelchair can be equipped with a range of op-
tional electric seat functions.

6.7.1 Safety Instructions

WARNING
Risk of falling while driving with electric seat options.
n Drive in street traffic only with the seat tilt and seat
height adjustments lowered and with a vertical
backrest.
n Drive with the seat raised or with the seat tilt/back
angle adjustment activated only for short distances at
home. Always use speed level 1 for this. Note that the
field of vision is limited when driving.
n Slightly tilt the seat to the rear when driving forwards
down inclines or over obstacles (e.g., curbs) and redu-
ce the speed.
n Use the seat height adjustment and the seat tilt only on
firm, level ground.
158 Ottobock
|
n Note that the climbing ability of power wheelchairs
with electric seat height adjustment and seat tilt is red-
uced. Driving on inclines and slopes is permitted under
ISO 7176-1 and 7176-2 with lowered seat height ad-
justment and lowered seat tilt up to max 6° (10%).
WARNING
Risk of falling caused by overload. Note that the maxi-
mum permitted load of the power wheelchair may be red-
uced when using the options "Electric seat height adjust-
ment" and "Electric seat tilt" (see "Technical Data" sec-
tion).
WARNING
Risk of pinching or crushing in the electric seat adjust-
ment area.
n Note that when electric seat options are used, inhe-
rent pinch and shear points are located between the
seat frame and the power wheelchair frame.
n Ensure that no body parts, such as hands or feet, are
in the danger area while electric seat options are
used.
C2000