Otto Bock C2000 Gebrauchsanweisung Seite 145

For driving use the joystick. The further the joystick is moved
from the centre position, the faster the power wheelchair will
travel in that direction.
The maximum speed with full deflection of the joystick de-
pends on the selected speed level. Releasing the joystick
automatically activates the brake function, which brings the
power wheelchair to a halt. When standing still, the me-
chanical brakes are automatically activated so the power
wheelchair cannot roll away.
The power wheelchair has a programmable number of
speed levels (delivery condition = 5 speed levels). The "M"
button (see Fig. 15, item 6) is used to increase the speed
level. After reaching the maximum speed level, the control
unit switches back to speed level 1.
C2000
Adapting the Driving Characteristics
WARNING
Risk of accidents and injury due to incorrect configura-
tion settings. Modified parameter settings in the configu-
ration can lead to changes in driving characteristics. In
particular, changes to the speed, acceleration, braking or
joystick settings can lead to unexpected and therefore un-
controllable operating performance with a risk of acci-
dents. Always test the driving characteristics of the power
wheelchair after configuration / programming is complete.
Programming must only be completed by authorised per-
sonnel. Neither Ottobock nor the control unit manufacturer
are liable for damages (especially in combination with spe-
cial controls) caused by programming that was not prop-
erly / professionally adapted to the abilities of the wheel-
chair user.
Only specialist dealers can use a hand programming de-
vice, which is to be connected to the control panel, to adapt
the speed, acceleration and deceleration values to the indi-
vidual wishes of the user.
Operation
Ottobock 145
|