Otto Bock C2000 Gebrauchsanweisung Seite 157

To charge the batteries, proceed as follows:
1. Switch off the controls of the power wheelchair.
2. Pull back the metal slide on the battery charger's plug
and connect the plug to the charging receptacle on the
power wheelchair.
3. Connect the battery charger to a wall socket and turn it
on. Charging will start automatically. The current charge
status is indicated on the LEDs of the battery charger.
4. When the charging process is complete, turn off the bat-
tery charger as follows:
5. First disconnect the battery charger from the mains sup-
ply. Pull back the metal slide on the battery charger's
plug and disconnect the battery charger from the power
wheelchair.
6. Turn on the controls. The power wheelchair is ready for
driving.
C2000
Fig. 22 Connecting the battery charger to the power wheelchair
1 Charging receptacle
Please see the instructions for use supplied with the battery
charger for further details on use and on the LED indicators.
Operation
1
Ottobock 157
|