Function Overview - Otto Bock C2000 Gebrauchsanweisung

Accessories

7.3.4.1 Function Overview

The attendant control can be used to operate the driving
function and the electric seat functions.
The module can be connected to the controller in combinati-
on with the hand control device or separately.
2
1
Fig. 36 Attendant control overview
1 On/Off button
2 Battery LED
3 Mode button
4 Mode LED
174 Ottobock
|
4
3
5
6
5 Display of the selected electric
seat function
6 Joystick
On/Off button (item 1)
The button is used to turn the power wheelchair on, to acti-
vate the drive-away lock (also see section 6.3.6) and to turn
the wheelchair off.
The control panel displays the following after the attendant
control is turned on:
Display symbol
Tab. 6 Display "Attendant control activated" on the control panel
Battery LED (item 2)
When turned on, the battery LED is lit. Colour and flash
codes provide information on the current battery capacity
status:
LED
Green is lit
Orange is lit
Red is lit
Information
Attendant control activated
Status
Battery capacity > 70%
Battery capacity 30%-70%
Battery capacity < 30%
C2000