Operation; Setting Options - Otto Bock C2000 Gebrauchsanweisung

6

Operation

6.1

Setting Options

WARNING
Risk of accidents and injury due to incorrect settings. All
later adaptation or setting work may only be carried out by
authorised specialist dealers.
WARNING
Risk of accident and injury if plug or screw connections
come loose. For all setting works or for folding down the
backrest for transportation, screw and / or plug connec-
tions have to be loosened. This can cause uncontrolled
movements of wheelchair components.
To avoid injuries at pinch and shear points, carry out such
works with the support of another person. Make sure to
always keep parts of the body (e. g. hands or head) out of
the danger zone.
CAUTION
Risk of accidents due to unsecured screw connections.
When screw connections with thread locks are loosened,
they must be replaced by new ones or secured with a
C2000
medium-strength thread lock substance (e. g. EuroLock
A24.20).
After any settings on the C2000 power wheelchair are es-
tablished or changed, the mounting screws and / or nuts
must be retightened securely. During tightening observe
torques when specified.
Various adjustments can be made to the power wheelchair.
The seat height, seat width and seat angle have been set in
accordance with the indications on the customer order form
and may only be changed by the specialist dealer.
The rear wheel suspension, which is included in the stand-
ard equipment, must be adjusted by an authorised dealer.
The following items can be adapted by the user:
n Back angle
n Height and position of the armrests
n Lower leg length
If need be, the side panels can be removed.
Operation
Ottobock 135
|