Otto Bock C2000 Gebrauchsanweisung Seite 175

LED
Red is flashing
Green is flashing
Red/Orange/Green flash-
ing alternately
Tab. 7 Battery capacity indicator
Mode button (item 3)
Switch between speed level 1 and 2 by pressing the button
briefly.
Push and hold the button (at least 2 seconds) to switch the
control unit to the electric seat functions.
Mode LED (item 4)
The Mode LED indicates the speed level status and system
faults using 3 colours and various flash codes:
LED
Green is lit
Orange is lit
C2000
Status
Battery deep discharge –
Charge as soon as possible
Battery over-voltage (e.g.
after driving downhill) – Con-
tinue driving slowly
Charging process / Drive-
away lock
Status
Speed level 1
Speed level 2
LED
Red – flashing
1x/2x/3x/4x/5x
Off
Tab. 8 Display of the speed levels / system faults
Display of the selected electric seat function (item 5)
The electric seat functions are accessed by pressing and
holding the „M" button (approx. 2 seconds).
The currently selected seat function is indicated on the con-
trol panel display (see section 6.3.5) and by the following
LEDs on the attendant control:
LED indicator
Accessories
Status
Fault (see section 8.2.2)
LED display switched to
seat function
Information
Electric back angle adjust-
ment
Electric seat tilt
Ottobock
|
175