Replacing The Casing Or Inner Tube Of Pneumatic Tyres; Replacing Defective Lamps - Otto Bock C2000 Gebrauchsanweisung

9.3.3 Replacing the Casing or Inner Tube of Pneumatic
Tyres
The rims of the wheels are two-piece rims that can be sepa-
rated by removing the Allen head screws.
1. Disassemble the respective wheel.
2. Completely let the air out of the tyre.
3. Loosen all five screws that connect the two parts of the
rim.
4. Lever the casing off the rim.
5. Press the valve to the inside through the rim.
6. Pull out the defective inner tube.
7. Repair the inner tube with a standard tyre repair kit or
replace it with a new one.
Properly reassemble all components upon completion of the
work.
C2000
Maintenance, Cleaning and Disinfection
Fig. 41 Removing the casing
9.4

Replacing Defective Lamps

NOTICE
Risk of damage due to moisture. Do not expose the
lamps to moisture. When reinserting the pane, make sure it
sits correctly in the housing and that the screws are firmly
tightened.
INFORMATION
Lamp housings or lamps can be ordered from a specialist
dealer.
Ottobock 193
|