Otto Bock C2000 Gebrauchsanweisung Seite 142

Operation
4 LCD display
5 On / Off button
6 Mode button
On / Off Button
The on / off button is used for switching the power wheel-
chair on and off and for activating the drive-away lock.
Mode Button
Briefly pressing the mode button increases the speed level.
After reaching the maximum speed level, you can change
back to speed level 1 by pressing the key again (1-2-3-4-5-
1-...). Pressing and holding the button (at least 2 seconds)
activates the "Electrical seat function" menu (see Section
6.3.5).
Horn
The horn will sound as long as the horn button is being
pressed.
Warning Flasher
Pressing the warning flasher button activates / deactivates
all four direction indicators.
142 Ottobock
|
10 Programming receptacle
11 Inputs for extern. push-buttons
Light
The front and rear lights are activated and deactivated by
pressing the light button.
Direction Indicators
The right or left front and rear direction indicators are acti-
vated and deactivated by pressing the "direction indicator,
right" or "direction indicator, left" button respectively. The
direction indicators automatically go out after 20 seconds.
LCD Display
The LCD display is the communication interface between
the user and the control unit. It indicates the selected speed
level, the remaining battery capacity, the status of electric
options and special functions as well as warnings and er-
rors. During the start phase, all display symbols are visible.
C2000