Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha TDM900A Montageanleitung Seite 14

Vorschau ausblenden Andere Handbücher für TDM900A:
Inhaltsverzeichnis

Werbung

EAA00090
NOTE:
Check the following items again when set up and predelivery service are completed.
A: INSTALLATION OF THE PARTS INCLUDED IN THE CRATE
Handlebar
Throttle grip
Front wheel
Front fender
Front brake hose clamp
Front brake master cylinder
Handlebar switch (left)
B: TIGHTENING TORQUE OF EACH PART
Handlebar holder (upper)
Front fender and outer tube
Front wheel axle
Front wheel axle pinch bolt
Front brake caliper bolt
Master cylinder and bracket
Grip end
Side cover
Front wheel sensor bolt
C: ROUTING OF WIRE, CABLES, ETC.
Throttle cables
Brake hoses
Clutch cable
Left handlebar switch lead
Brake switch lead
D: ADJUSTMENTS
Checking and charging the battery
Checking the tire pressure
Checking the engine oil level
Checking the coolant level
Adjusting the engine idling speed
Adjusting the throttle cable free play
Adjusting the front brake
Adjusting the rear brake
Checking the brake fluid level
E: FUNCTION AND PERFORMANCE
Check for the function of headlight, meter light and tail light
Check for the function of brake light
Check for the function of turn signal light and indicator light
Check for the tone quality of the horn
Check for the function of the indicator lights on the speedometer
Check for brake feeling
Check for engine noise (Yes/No)
Check for exhaust leak (Yes/No)
F: ACCESSORIES, ETC. FOR DELIVERY
Owner's manual
Owner's tool kit
TDM900A(T) 2005
SET-UP AND PREDELIVERY CHECKLIST
Clutch cable
Rear view mirror
Windshield
Band
Side cover (left and right)
Battery
Sensor housing
23 Nm (2.3 m•kg, 17 ft•lb)
6 Nm (0.6 m•kg, 4.3 ft•lb)
72 Nm (7.2 m•kg, 52 ft•lb)
20 Nm (2.0 m•kg, 14 ft•lb)
40 Nm (4.0 m•kg, 29 ft•lb)
10 Nm (1.0 m•kg, 7.2 ft•lb)
26 Nm (2.6 m•kg, 19 ft•lb)
4 Nm (0.4 m•kg, 2.9 ft•lb)
30 Nm (3.0 m•kg, 22 ft•lb)
Clutch switch lead
Right handlebar switch lead
Battery positive
Battery negative
Front wheel sensor lead
Breeding the hydraulic brake system
Adjusting the clutch cable free play
Adjusting the front fork legs
Adjusting the rear shock absorber assembly
Adjusting the drive chain slack
Adjusting the rear brake light switch
Adjusting the headlight beams
Adjusting the digital clock
–7–
lead
lead

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Tdm900at

Inhaltsverzeichnis