Stryker SDC3 Bedienungsanleitung Seite 50

6
����� ��������
The SDC3 provides audio feedback for important events through spoken responses. The
following table details the audio responses and prompts issued by the SDC3.
Note: To select the language of the spoken responses, refer to the Language Settings
instructions in the SDC3 Base User Guide.
S S D D C C 3 3 F F e e e e d d b b a a c c k k
Greetings.
One moment please.
SDC Ready.
Digital Capture Initializing.
[Device] connected.
[Device] disconnected.
Duplicate device connected, please
disconnect.
Unknown device detected.
LCD unavailable
or
LCD communication lost
Maximum number of connected
devices has been exceeded.
EN- 46
D D e e f f i i n n i i t t i i o o n n
SDC3 has received power and is starting up.
SDC3 is booting. Wait for further instruction.
SDC3 is ready to use.
Initializing digital capture settings
A device is connected to the SDC3 and ready to
use.
A device has been disconnected from the SDC3
or powered down and is no longer accessible
through device and voice control.
Two devices of the same type (such as two
cameras or two powered shavers) have been
connected to the SDC3. Disconnect one of the
devices.
An unrecognizable device has been to connected
to the SDC3. Contact technical support for
information regarding available integration
packages (+1.800.624.4422)
The LCD screen is not communicating correctly
with the SDC3. The system remains functional,
but information on the screen is unreliable.
Contact technical support (+1.800.624.4422)
The maximum number of devices allowed is 12.
Disconnect one or more devices to reach this
number.
The SDC3 recognizes a USB drive that has been
inserted into the USB port on the front panel of the
SDC3. Wait for further instruction.