Connecting Compatible Stryker Devices To The Sdc3; Connecting Compatible Devices With An Edam To The; Sdc3 - Stryker SDC3 Bedienungsanleitung

• Press the up or down arrows to select the desired frequency.
• Press and hold the set button until "Stored" displays on the LCD window.
• Make sure the microphone is not muted.
• Slide the control cover over the transmitter buttons to protect them from accidental
selections.
Select the same operating frequency for the reciever:
5. Power button
6. LCD Window
7. Up/Down arrows
8. Set button
• Press the set button on the reciever twice.
• Press the up or down arrows to select the same frequency as selected on the
transmitter.
• Hold the set button until "Stored" displays on the LCD window.
• Press the down arrow until "Quit" displays on the LCD window.
• Press the set button until the status bar displays on the LCD window.
3.5 Connecting Compatible Stryker Devices to the

SDC3

Connect compatible Stryker devices to the device ports on the rear of the SDC3.
3.6 Connecting Compatible Devices with an EDAM to
the SDC3
The following devices require an optional EDAM package in order to work with the SDC3
Device Control Package.
EN- 10